Select a different country or region to see content for your location.
United States
18:11:18 GMT+0000 (Coordinated Universal Time)
ZKLF30100-2Z-XL
Axial angular contact ball bearing
Axial angular contact ball bearings ZKLF..-2Z, double direction, for screw mounting, gap seals on both sides
Replaces
ZKLF 30100.2Z, ZKLF30100-2Z
Frequently bought together
Main Dimensions & Performance Data
| d | 30 mm | Bore diameter |
0 mm | Bore diameter upper tolerance | |
-0,005 mm | Bore diameter lower tolerance | |
| D | 100 mm | Outside diameter |
0 mm | Outside diameter upper tolerance | |
-0,01 mm | Outside diameter lower tolerance | |
| B | 38 mm | Width |
0 mm | Width upper tolerance | |
-0,25 mm | Width lower tolerance | |
| Ca | 65.000 N | Basic dynamic load rating, axial |
| C0a | 108.000 N | Basic static load rating, axial |
| Cua | 6.500 N | Fatigue load limit, axial |
| nG Grease | 5.600 1/min | Limiting speed for grease lubrication |
| nϑ | 4.000 1/min | Thermally safe operating speed |
| MR | 0,4 Nm | Bearing frictional torque |
| ≈m | 1,686 kg | Weight |
Mounting dimensions
| Da max | 64 mm | Maximum diameter of housing |
| da min | 47 mm | Minimum diameter shaft |
| t1 | 0,2 mm | Position tolerance of bore in the housing |
M8 | Size of fixing screws | |
| na | 8 | Number of holes in adjacent construction |
| ta | 45 ° | Pitch separation angle of holes in adjacent construction |
M6 | Connection thread for lubrication |
Dimensions
| d1 | 51 mm | Rib diameter inner ring |
| rmin | 0,3 mm | Minimum chamfer dimension |
| r1 min | 0,6 mm | Minimum chamfer dimension |
| J | 80 mm | Pitch circle diameter fixing holes |
| d2 | 8,8 mm | Fixing holes diameter |
| b | 3 mm | Width of extraction slot |
| I | 30 mm | Distance of extraction slot |
| n | 8 | Pitch quantity of fixing holes |
| t | 45 ° | Pitch separation angle of fixing holes |
| a | 60 ° | Contact angle |
Temperature range
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 120 °C | Operating temperature max. |
Additional information
| caL | 950 N/µm | Rigidity axial |
| ckL | 400 Nm/mrad | Tilting rigidity |
| Mm | 1,91 kg*cm2 | Mass moment of inertia |
2,5 µm | Axial runout | |
ZMA30/52 | Recommended INA precision locknut for radial locking | |
AM30 | Recommended INA precision locknut for axial locking | |
| MA | 65 Nm | Tightening torque for the recommended INA precision locknut |
19.509 N | Required locknut force axial |
