Select a different country or region to see content for your location.
United States
02:11:26 GMT+0000 (Coordinated Universal Time)
MKUSE25-250-ZR-W2-FA517.1
Linear actuator
Actuators with six-row linear recirculating bearing and guideway assembly, monorail guidance system and toothed belt drive. With support rail in two segments
n.r.
FA517.1 | Support Rail Design |
Main Dimensions & Performance Data
| B2 | 112 mm | Total Width |
| H | 125 mm | Total Height |
| L | 250 mm | Length of Carriage |
Mounting dimensions
| B1 | 110 mm | Width of Carriage |
| D86 | 95 mm | |
| Tol D86 | G7 | Tolerance |
| D87 | 115 mm | |
| d85 | 20 mm | Tolerance h7 |
| d86 | 76 mm | |
| G43 | M10 | |
| G87 | M8 | |
| h13 | 25 mm | |
| h14 | 75 mm | |
| h18 | 5 mm | |
| JB43 | 80 mm | |
| Tol JB43 | 0,1 | Upper Tolerance |
| Tol JB43 | 0,1 | Lower Tolerance |
| JL43 | 180 mm | |
| jB8 | 80 mm | |
| L2 max | 16.000 mm | Maximum length of Support Rail |
| L88 | 31 mm | |
| NB85 | 6 mm | Tolerance P9 |
| NL85 | 25 mm | Length of Keyway |
| NT85 | 3,5 mm | Depth of Keyway |
| t43 max | 20 mm | Depth of Thread |
| t87 max | 15 mm | Depth of Thread |
Dimensions
| B18 | 15 mm | |
| B72 | 2 mm | |
| H1 | 21 mm | Height of Carriage |
| H2 | 102 mm | Height of Support Rail |
| H4 | 115,7 mm | Height of Return Unit |
| H18 | 90 mm | |
| h85 | 58 mm | |
| L1 | 263 mm | |
| L4 | 115,5 mm | Length of Return Unit |
| L6 | 6 mm | Length of Wiper Brushes |
| L18 | 400 mm | |
| Lx1 min | 50 mm | |
| B4 | 111 mm | Width of Return Unit |
| T86 | 4 mm | Depth Fit |
| Tol T86 | 0 mm | Lower tolerance |
| Tol T86 | 0,5 mm | Upper Tolerance |
Technical data
| Rx | 110 mm | |
| Ry | 68,3 mm | |
| S | 85 mm | Safety Distance |
| mLAW | 4,15 kg | |
| m3 | 4,15 kg | Mass of additional Carriage |
| vmax | 5 m/s | Maximum Speed |
| amax | 30 m/s2 | Maximum Acceleration |
| I C | 61.700 N | Load direction I: compressive load |
| I C0 | 162.000 N | Load direction I: compressive load |
| II C | 42.200 N | Load direction II: tensile load |
| II C0 | 90.000 N | Load direction II: tensile load |
| III C | 45.400 N | Load direction III: lateral load |
| III C0 | 94.000 N | Load direction III: lateral load |
| M0x per | 1.380 Nm | Max. permissible static moment per Carriage 1 |
| M0y per | 2.400 Nm | Max. permissible static moment per Carriage 1 |
| M0z per | 3.200 Nm | Max. permissible static moment per Carriage 1 |
| Iy | 712 cm4 | Geometrical moments of inertia of Support Rail |
| lz | 506 cm4 | Geometrical moments of inertia of Support Rail |
Additional information
75 Nm | Max. permissible drive torque | |
2xKWSE25 | Carriage | |
0,1 mm | Repeat Accurancy ± | |
250 mm | Feed (mm/rotation) | |
50AT10 | Toothed Belt | |
0,315 kg/m | Mass of Toothed Belt | |
1.880 N | Permissible Toothed Belt operating force | |
14,7 kg*cm2 | Mass moment of inertia of Gears |
Temperature range
| max | 80 °C | Maximum operating Temperatur |
| min | 0 °C | Minimum operating Temperatur |
Footnotes
1
The values are single loads and apply when the underside of the actuator is fully supported. If there are several carriage units per actuator or combined loads are present, these must be reduced.
Downloads:
Your current product variant
| Size code | 25 | |
| Length of carriage | 250 | 250 mm |
| Design | / | Basis |
| Drive type | (3)ZR | Toothed belt drive |
| Additional carriage | W2 | Second, driven carriage |
| Attachment to the carriage | / | Threaded holes |
Recently viewed products
Wait to see recently viewed products