Technical information on Yoke type ball bearing track rollers, stud type ball bearing track rollers
Ball bearing track rollers:
- are ready-to-fit, single or double row rolling bearings based on deep groove or angular contact ball bearings
- are supplied with or without a stud (designs without a stud are mounted on shafts or studs)
- have particularly thick-walled outer rings with a crowned or cylindrical outside surface
- can support high radial loads
- tolerate axial loads which are due to small misalignment defects, skewed running or temporary contact running impacts
- are sealed on both sides
- are also available with a plastic tyre on the outer ring for low-noise running
- are not mounted in a housing bore, but are supported on a flat mating track
- can be adjusted to the mating track in the design with the eccentric collar, thus permitting, for example, larger manufacturing tolerances in the adjacent construction
|
Double row stud type track roller supported on a flat mating track
|
 |
